# Post-beamtime checklist

## Near the end of the beamtime
- Make arrangements with your local contact to *remove* all of your samples from the microscope and prep chamber.
- *Clean up* your work area in the *chemistry lab*, if applicable.
- Clean up your work area in the *MAXPEEM prep lab* (next to the measurement hutch), if applicable.

```{caution}
**At the end of the beamtime**
- Clean up any *leftover food, cups, paper scraps, etc.* from the hutches.
- Put away any *power supplies, cables, tools, etc.*
- Erase any markings from the *whiteboards* that are directly related to your beamtime.
- Copy your *data* from the appropriate folder on the network drive offline-2
- If *shipping* samples and/or equipment back to your home institute, package everything up and transfer the package to your local contact.
- Pack up all of your samples, and *clean up* your work area on the sample prep table in the measurement/microscope hutch.
- *Tell* your local contact what worked well and not well.
```

## Shortly after the beamtime has ended
- Submit beamtime *feedback* in DUO.
- Submit an experiment *report* in DUO.